OSDev.org

The Place to Start for Operating System Developers
https://f.osdev.org/

ACPICA almost working now

https://f.osdev.org/viewtopic.php?t=24229

Page 1 of 1

ACPICA almost working now

Posted: Wed Oct 05, 2011 2:56 pm
by rdos
I've made some major advances in building C/C++ based device-drivers for RDOS. I use OpenWatcom, and a special clib in order to support device-drivers. Device-drivers use a 32-bit compact memory model, meaning that all code is in the same segment (function pointers are near), while data pointers are far by default. I also use the -zdp option that assumes that DS is loaded with DGROUP, so that data-references to static data won't require segment register loads.

Using these settings, it is possible to compile Intel's ACPICA code without modifications. I've also provided the OS required functions.

Anyway, I can now run both the table initialization code, and the module intialization code on two different machines (an AMD Geode and a 4-core AMD Athlon). Soon I should be able to get basic MP information from ACPI, and the APIC IRQ routing table.

The best thing is that I've debugged all of the ACPI-code at the source level over a TCP/IP connection with the Windows version of OpenWatcom´s debugger.

Next I will probably write some more complex drivers, like CDROM support, USB-disc support and similar in C/C++.

Re: ACPICA almost working now

Posted: Sun Oct 09, 2011 7:40 am
by rdos
The ACPI driver now works on a AMD geode and a 4-core AMD Athlon. All the initialization stages works, and the computer now cannot be turned-off with the power-button. :mrgreen:

Additionally, I've started to build lists of devices, their mappings to hardware, and their IRQs. This will be the real bonus. PCI IRQs of some devices will now be possible to obtain on an APIC-configured system.

I also anticipate to solve the issue of searching for PCI devices, as ACPI can enumerate all PCI-devices, this should now be a simple issue to solve.

And I should be able to read-out the CPU temperature. :mrgreen:

Re: ACPICA almost working now

Posted: Sun Oct 09, 2011 3:35 pm
by Holus
rdos wrote:The ACPI driver now works on a AMD geode and a 4-core AMD Athlon. All the initialization stages works, and the computer now cannot be turned-off with the power-button. :mrgreen:
So now you make [ALT]+[CTRL]+[Power-button] to shut down the system =P~
rdos wrote:And I should be able to read-out the CPU temperature. :mrgreen:
I was searching for some info but it was to vendor specific for me. I do like you getting it done. Gives me hope!!!! [-o<

Re: ACPICA almost working now

Posted: Mon Oct 10, 2011 1:48 am
by rdos
Holus wrote:
rdos wrote:The ACPI driver now works on a AMD geode and a 4-core AMD Athlon. All the initialization stages works, and the computer now cannot be turned-off with the power-button. :mrgreen:
So now you make [ALT]+[CTRL]+[Power-button] to shut down the system =P~
Yeah. Nobody should be able to shut it down without me giving some directions. :mrgreen:
Holus wrote:
rdos wrote:And I should be able to read-out the CPU temperature. :mrgreen:
I was searching for some info but it was to vendor specific for me. I do like you getting it done. Gives me hope!!!! [-o<
ACPI provides a defined interface for this which is not chipset specific. The downside is that ACPI is extremely complex, and that free implementations like ACPICA requires a lot from the OS. It especially requires a C-compiler that can produce functional code for your OS, and some library functions.

Re: ACPICA almost working now

Posted: Mon Oct 10, 2011 9:25 am
by rdos
Output ACPI device-list from my AMD Geode computer on the "acpi" command on the console:

Code: Select all

\_SB_ (ZZY2, MIN_, SLEN, S2BF, SCMP, I2BM, PABM, PBBM, PCBM, PDBM, _INI, GPIO, GLEE)
\_SB_.PWRB (_HID, _STA)
\_SB_.SLPB (_HID, _PRW, _STA)
\_SB_.MEM_ (_HID, _CRS)
\_SB_.AC__ (_HID, _PCL, _PSR, _STA)
\_SB_.PCI0 (_HID, _ADR, _PRW, _STA, CRES, _CRS, _PRT, _INI)
\_SB_.PCI0.USB0 (_ADR, _STA, PRW5, PRW6, _PRW)
\_SB_.PCI0.USB1 (_ADR, _STA, _PRW)
\_SB_.PCI0.USB2 (_ADR, _STA)
\_SB_.PCI0.USB3 (_ADR, _STA)
\_SB_.PCI0.PIDE (_ADR, _STA)
\_SB_.PCI0.PIDE.PRI_ (_ADR, _STA)
\_SB_.PCI0.PIDE.PRI_.MST_ (_ADR, _STA)
\_SB_.PCI0.PIDE.PRI_.SLV_ (_ADR, _STA)
\_SB_.PCI0.PCI1 (_ADR, _PRW)
\_SB_.PCI0.PCI2 (_ADR, _PRW)
\_SB_.PCI0.PCI3 (_ADR, _PRW)
\_SB_.PCI0.PCI4 (_ADR, _PRW)
\_SB_.PCI0.CYRX (_ADR, _INI, PRCN, PIRX, LPIO, ZZZ0, ZZZ1, ZZZ2, ZZZ3, ZZZ4, ZZZ5, ZZZ6, COM1, P3F8, P3F9, P3FA, P3FB, P3FC, P3FD, P3FE, P3FF, COM2, P2F8, P2F9, P2FA, P2FB, P2FC, P2FD, P2FE, P2FF, COM3, P3E8, P3E9, P3EA, P3EB, P3EC, P3ED, P3EE, P3EF, COM4, P2E8, P2E9, P2EA, P2EB, P2EC, P2ED, P2EE, P2EF, ICOM, KBCT, P060, P064)
\_SB_.PCI0.CYRX.LNKA (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.CYRX.LNKB (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.CYRX.LNKC (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.CYRX.LNKD (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.CYRX.SYSR (_HID, _UID, _CRS)
\_SB_.PCI0.CYRX.PIC_ (_HID, _CRS)
\_SB_.PCI0.CYRX.DMA1 (_HID, _CRS)
\_SB_.PCI0.CYRX.TMR_ (_HID, _CRS)
\_SB_.PCI0.CYRX.RTC_ (_HID, _CRS)
\_SB_.PCI0.CYRX.SPKR (_HID, _CRS)
\_SB_.PCI0.CYRX.COPR (_HID, _CRS)
\_SB_.PCI0.CYRX.FDC0 (_HID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.CYRX.UAR1 (_HID, _UID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.CYRX.UAR2 (_HID, _UID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.CYRX.IRDA (_HID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.CYRX.LPT1 (_HID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.CYRX.ECP1 (_HID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.CYRX.PS2M (_HID, _STA, _CRS, _PRW)
\_SB_.PCI0.CYRX.PS2K (_HID, _CID, _STA, _CRS, _PRW)
\_SB_.PCI0.CYRX.PSMR (_HID, _UID, _STA, _CRS)
\_SB_.PCI0.CYRX.UARA (_HID, _UID, _PRW, _STA, _DIS, UCRS, _CRS, _PRS, _SRS, _S1D, _S3D, _S4D, _PS0, _PS3, _PSC)
\_SB_.PCI0.CYRX.UARB (_HID, _UID, _PRW, _STA, _DIS, UCRS, _CRS, _PRS, _SRS, _S1D, _S3D, _S4D, _PS0, _PS3, _PSC)
\_TZ_
Here is the ACPI tables for my 4-core AMD (a little more complex):

Code: Select all

\_SB_ (SMOD, SXTM, SMEM)
\_SB_.PWRB (_HID, _STA)
\_SB_.PCI0 (_HID, _ADR, _INI, BAR1, MMIO, _S3D, _STA, _CRS, PICM, APIC, _PRT, KBCT, P060, P064, _PRW)
\_SB_.PCI0.SYSR (_HID, _UID, _CRS)
\_SB_.PCI0.SMB0 (_ADR, HETT)
\_SB_.PCI0.USB0 (_ADR, _PRW, _S3D)
\_SB_.PCI0.USB1 (_ADR, _PRW, _S3D)
\_SB_.PCI0.USB2 (_ADR, _PRW, _S3D)
\_SB_.PCI0.USB3 (_ADR, _PRW, _S3D)
\_SB_.PCI0.USB4 (_ADR, _PRW, _S3D)
\_SB_.PCI0.USB5 (_ADR, _PRW, _S3D)
\_SB_.PCI0.USB6 (_ADR, _PRW, _S3D)
\_SB_.PCI0.SBAZ (_ADR, PCI_, DNSP, DNSO, ENSR, _PRW)
\_SB_.PCI0.SATA (_ADR, _INI, SACS, STB5, SPTM)
\_SB_.PCI0.SATA.PRID (_ADR, _GTM, _STM, PRIS, _PS0, _PS3, _PSC)
\_SB_.PCI0.SATA.PRID.P_D0 (_ADR, _STA, S12P, _PS0, _PS3, _PSC)
\_SB_.PCI0.SATA.PRID.P_D1 (_ADR, _STA, S12P, _PS0, _PS3, _PSC)
\_SB_.PCI0.SATA.SECD (_ADR, _GTM, _STM, SECS, _PS0, _PS3, _PSC)
\_SB_.PCI0.SATA.SECD.S_D0 (_ADR, _STA, S12P, _PS0, _PS3, _PSC)
\_SB_.PCI0.SATA.SECD.S_D1 (_ADR, _STA, S12P, _PS0, _PS3, _PSC)
\_SB_.PCI0.PEX0 (_ADR, _STA, _PRW, PIC0, API0, _PRT)
\_SB_.PCI0.PEX1 (_ADR, _STA, _PRW, PIC1, API1, _PRT)
\_SB_.PCI0.PEX2 (_ADR, _STA, _PRW, PIC2, API2, _PRT)
\_SB_.PCI0.PEX3 (_ADR, _STA, _PRW, PIC3, API3, _PRT)
\_SB_.PCI0.LPC0 (_ADR, PIRQ, PIID, PIDA, IPRS, PIRA, PIRB, PIRC, PIRD, PIRE, PIRF, PIRG, PIRH, PIRS, HDAD, GEC_, USB1, USB2, USB3, USB4, USB5, USB6, USB7, IDE_, SATA, GPP0, GPP1, GPP2, GPP3, DSPI)
\_SB_.PCI0.LPC0.PMIO (_HID, _UID, _CRS)
\_SB_.PCI0.LPC0.LNKA (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNKB (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNKC (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNKD (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNKE (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNKF (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNK0 (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.LNK1 (_HID, _UID, _STA, _PRS, _DIS, _CRS, _SRS)
\_SB_.PCI0.LPC0.PIC_ (_HID, _CRS)
\_SB_.PCI0.LPC0.DMA1 (_HID, _CRS)
\_SB_.PCI0.LPC0.TMR_ (_HID, ATT5, ATT6, _CRS)
\_SB_.PCI0.LPC0.HPET (_HID, ATT3, ATT4, _STA, _CRS)
\_SB_.PCI0.LPC0.RTC_ (_HID, ATT0, ATT1, ATT2, ATT3, _CRS)
\_SB_.PCI0.LPC0.SPKR (_HID, _CRS)
\_SB_.PCI0.LPC0.COPR (_HID, _CRS)
\_SB_.PCI0.P2P_ (_ADR, _S3D, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.IDE_ (_ADR, UDMT, PIOT, PITR, MDMT, MDTR, IDE_, PPIT, SPIT, PMDT, SMDT, PPIC, SPIC, PPIM, SPIM, PUDC, SUDC, PUDM, SUDM, GETT, GTM_, STM_, GTF_)
\_SB_.PCI0.IDE_.PRID (_ADR, _GTM, _STM)
\_SB_.PCI0.IDE_.PRID.P_D0 (_ADR, _GTF)
\_SB_.PCI0.IDE_.PRID.P_D1 (_ADR, _GTF)
\_SB_.PCI0.IDE_.SECD (_ADR, _GTM, _STM)
\_SB_.PCI0.IDE_.SECD.S_D0 (_ADR, _GTF)
\_SB_.PCI0.IDE_.SECD.S_D1 (_ADR, _GTF)
\_SB_.PCI0.PCE2 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCE3 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCE4 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCE5 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCE6 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCE7 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCE9 (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCEA (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCEB (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.PCEC (_ADR, _PRW, PICM, APIC, _PRT)
\_SB_.PCI0.FDC0 (_HID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.UAR1 (_HID, _UID, _STA, _DIS, _CRS, _PRS, _SRS)
\_SB_.PCI0.PS2M (_HID, _STA, _CRS, _PRW)
\_SB_.PCI0.PS2K (_HID, _STA, _CRS, _PRW)
\_SB_.PCI0.PSMR (_HID, _UID, _STA, _CRS)
\_SB_.PCI0.AGP_ (_ADR, PICM, APIC, _PRT)
\_SB_.PCI0.EXPL (_HID, _UID, _CRS)
\_SB_.MEM_ (_HID, _CRS)
\_TZ_
\AOD_ (DBG_, OBID, OBIT, OBDT, BM01, XINI, EM01, BM05, EM05, HM06, HM07, QLST, AODT, ASCD, ASTS, ASBF, GFXO, GMOD, ID01, ID02, SOID, WROW, GROW, CPTB, CBTP, ABS_, EXBF, ACMS, P72_, P73_, BSF_, GCMS, SCMS, STNV, CPUD, GFXD, SBCD, GETC, SETC, CINI, GCCX, CCLK, SCCX, WTCX, RMPC, UP62, VINI, SETV, GETV, RWBY, GF01, OVFL, OCFL, TSBF, GVBF, AM01, AM02, AM03, AM04, AM05, AM06, AM07, AM08, OBSV, APTS, AWAK, CMDV, AM09, OBUF, AM10, CMDL, AM11, R301, R302, R303, R304, VEND, R401, R404, R501, WQBA, _HID, _UID, _WDG, WMAA, GVB1, GVB2)
\AWY_ (_HID, _STA)
The portable Sony-Vaio with a Intel Core Duo does not boot with the ACPI-driver, rather "hangs up" in AcpiLoadTables, so I don't know how it looks like.
All times are UTC-06:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited