Something wrong with my bootloader ...

Question about which tools to use, bugs, the best way to implement a function, etc should go here. Don't forget to see if your question is answered in the wiki first! When in doubt post here.
User avatar
Candy
Member
Member
Posts: 3883
Joined: Tue Oct 17, 2006 11:33 pm
Location: Eindhoven

Re:Something wrong with my bootloader ...

Post by Candy »

test on a phoenix 4.0 laptop with k6-2-366 processor also ran in something like 15 seconds (which was more than I expected honestly) but then did everything it should. It might be the disk drive or an error in the chipset / BIOS. What sort of bios do the systems have?
Curufir

Re:Something wrong with my bootloader ...

Post by Curufir »

Another shot in the dark. Have you tried loading the BIOS parameter table with some decent values before doing the load? Some of the ones supplied by BIOS are...odd.
User avatar
Pype.Clicker
Member
Member
Posts: 5964
Joined: Wed Oct 18, 2006 2:31 am
Location: In a galaxy, far, far away
Contact:

Re:Something wrong with my bootloader ...

Post by Pype.Clicker »

srg wrote: Right, just tested on system:

Award Modular BIOS 4.51PG
TMC AI5VG+ mobo
VIA VT82C598MVP Nothbridge
VIA VT82C586B Southbridge
Winbond W83877F Super IO

AMD K6-III 450MHz - about 15 seconds
K6-II 500MHz - about 16 secs, this is not very scientific BTW.
K6 166MHz, same about 16 secs
So at least it's not a BIOS thing, since you look to have the same as i do, and the northbridge is unlikely to be involved too (iirc).
BTW Are you sure the disk your testing it on and the drive are ok, on your machine it could be struggling to read and reread the disk.
Well, that has appeared repeatedly with a large collection of floppies (actually, whatever floppy i put in the drive). The loader should display numbers if it has to retry a sector (and it does e.g. if i remove the disk), but it never does so.

I should indeed try to mount another floppy unit in the system and check if that could be the problem, though since simply changing the *address* at which data are loaded appears to solve the problem, i don't see how the floppy driver could be involved. It has never shown any trouble when used e.g. under DOS.

btw, it tooks about 16 seconds to linux to write the disk image to a floppy (the image is about 486K and the whole chunk is read at once at boottime).
Post Reply