Something wrong with my bootloader ...
Re:Something wrong with my bootloader ...
test on a phoenix 4.0 laptop with k6-2-366 processor also ran in something like 15 seconds (which was more than I expected honestly) but then did everything it should. It might be the disk drive or an error in the chipset / BIOS. What sort of bios do the systems have?
-
Curufir
Re:Something wrong with my bootloader ...
Another shot in the dark. Have you tried loading the BIOS parameter table with some decent values before doing the load? Some of the ones supplied by BIOS are...odd.
- Pype.Clicker
- Member

- Posts: 5964
- Joined: Wed Oct 18, 2006 2:31 am
- Location: In a galaxy, far, far away
- Contact:
Re:Something wrong with my bootloader ...
So at least it's not a BIOS thing, since you look to have the same as i do, and the northbridge is unlikely to be involved too (iirc).srg wrote: Right, just tested on system:
Award Modular BIOS 4.51PG
TMC AI5VG+ mobo
VIA VT82C598MVP Nothbridge
VIA VT82C586B Southbridge
Winbond W83877F Super IO
AMD K6-III 450MHz - about 15 seconds
K6-II 500MHz - about 16 secs, this is not very scientific BTW.
K6 166MHz, same about 16 secs
Well, that has appeared repeatedly with a large collection of floppies (actually, whatever floppy i put in the drive). The loader should display numbers if it has to retry a sector (and it does e.g. if i remove the disk), but it never does so.BTW Are you sure the disk your testing it on and the drive are ok, on your machine it could be struggling to read and reread the disk.
I should indeed try to mount another floppy unit in the system and check if that could be the problem, though since simply changing the *address* at which data are loaded appears to solve the problem, i don't see how the floppy driver could be involved. It has never shown any trouble when used e.g. under DOS.
btw, it tooks about 16 seconds to linux to write the disk image to a floppy (the image is about 486K and the whole chunk is read at once at boottime).