Computer crashes once bootloader tries to jump to kernel cod

Question about which tools to use, bugs, the best way to implement a function, etc should go here. Don't forget to see if your question is answered in the wiki first! When in doubt post here.
distantvoices
Member
Member
Posts: 1600
Joined: Wed Oct 18, 2006 11:59 am
Location: Vienna/Austria
Contact:

Re:Computer crashes once bootloader tries to jump to kernel

Post by distantvoices »

<me>
hands over a buncha hankies to Pype
Here, have a good snort and let it go lad. *chuckle*
</me>

@kofrad: honestly, align your kernel at 0x10000 and get it out of the bootloaders way. I'm sure this will save you quite some troubles later on. Believe me, your kernel gonna grow faster than you 'll believe once you've got a certain knack.
... the osdever formerly known as beyond infinity ...
BlueillusionOS iso image
kofrad

Re:Computer crashes once bootloader tries to jump to kernel

Post by kofrad »

I changed my linker script and my bootloader code to load the kernel at 0x10000, but when I run make, I get this

Code: Select all

bootsect.asm:23: warning: word value exceeds bounds
If I try to run it anyway, bochs will panic. I'm sorry if I dont seem to get it, but I'm still really new to this. Maybe it'll be easier and better if I was to convert my kernel to use the multiboot spec and just use grub?
User avatar
Brendan
Member
Member
Posts: 8561
Joined: Sat Jan 15, 2005 12:00 am
Location: At his keyboard!
Contact:

Re:Computer crashes once bootloader tries to jump to kernel

Post by Brendan »

Hi,
kofrad wrote:

Code: Select all

bootsect.asm:23: warning: word value exceeds bounds
If I try to run it anyway, bochs will panic. I'm sorry if I dont seem to get it, but I'm still really new to this. Maybe it'll be easier and better if I was to convert my kernel to use the multiboot spec and just use grub?
If you're having trouble with something like this, then trying to find bugs in a full blown kernel is going to give you nightmares. My advice is to make the boot code work perfectly (just for experience) and then use GRUB (if you still feel like it) after that.

Take a look at line number 23 in "bootsect.asm", and see if you can find a word value that is exceeding it's bounds (ie. one that doesn't fit in 16 bits)...


Cheers,

Brendan
For all things; perfection is, and will always remain, impossible to achieve in practice. However; by striving for perfection we create things that are as perfect as practically possible. Let the pursuit of perfection be our guide.
kofrad

Re:Computer crashes once bootloader tries to jump to kernel

Post by kofrad »

OK, a word's maximum integer value is 65,535 and the hex number 0x10000 = 65,536. The register that I am placing the hex value into is only 16 bits. How am I able to tell it to use a 32 bit number, or can I?
User avatar
Pype.Clicker
Member
Member
Posts: 5964
Joined: Wed Oct 18, 2006 2:31 am
Location: In a galaxy, far, far away
Contact:

Re:Computer crashes once bootloader tries to jump to kernel

Post by Pype.Clicker »

you could make it a 32bits register, but the BIOS would discard the highest bits.

Most likely, you need to set the segment register at 0x1000 and the offset at 0. That'll make you 0x1000*16 + 0 = 65536 :)

That question confirms my first impression that you definitely need more assembly skillz. Ever tried "the Art Of Assembly programming" tutorials ?
kofrad

Re:Computer crashes once bootloader tries to jump to kernel

Post by kofrad »

I'm real sorry to still be bothering you with this problem, I have my linker script set to align everything at 0x10000 and I wasnt exactly sure of how to set the segment register, so I used this code in the part where I tell the BIOS where to load my kernel data

Code: Select all

mov ax,0x1000
mov es,ax
mov bx,0x0
and for the jmp instruction to jump to the kernel I used this

Code: Select all

jmp 0x1000:0x0
When I enable tracing for bochs, it runs through and then freezes on the jmp instruction. I'm pretty sure I messed something up here because I know bochs will clear all memory to zero when it starts and it might be freezing trying to execute all zeros. I'm not even entirely sure my link.ld is correct, this might be because the link.ld is aligning everything at 0x10000. Here is my link.ld

Code: Select all

SECTIONS
{
   . = 0x10000;
   
   .text :
   {
      stub.o(asmstub);
      *(.text)
   }
   
   .rodata ALIGN (0x10000) :
   {
      *(.rodata)
   }
   
   .data ALIGN (0x10000) :
   {
      *(.data)
   }
   
   .bss :
   {
      _sbss = .;
      *(COMMON)
      *(.bss)
      _ebss = .;
   }
}
Also, I found the art of assembly tutorials and I'm going through them right now. Thanks for the tip :)
User avatar
Pype.Clicker
Member
Member
Posts: 5964
Joined: Wed Oct 18, 2006 2:31 am
Location: In a galaxy, far, far away
Contact:

Re:Computer crashes once bootloader tries to jump to kernel

Post by Pype.Clicker »

erhm. Since you're enabling pmode in your bootloader, you should rather have

Code: Select all

jmp 8:0x10000
The parameters for loading and the linker script seems both fine.

btw, you should try to gather more information from bochs than just "it crashes".
It might have told you "running in bogus memory" or "tripple fault". Those things are explained in the TroubleShooting category of the FAQ
kofrad

Re:Computer crashes once bootloader tries to jump to kernel

Post by kofrad »

Now I have my kernel working at 0x10000, but I still have the problem with my print() function. Bochs seems to freeze right after it leaves the function and the function dosent print anything. :( Here is my print() function if you could possibly help me out:

Code: Select all

void print(const char *_message)
{
   unsigned short offset;
   unsigned long i;
   unsigned char *vidmem = (unsigned char *)0xB8000;

   // Read cursor position
   out(0x3D4, 14);
   offset = in(0x3D5) << 8;
   out(0x3D4, 15);
   offset |= in(0x3D5);

   // Start at writing at cursor position
   vidmem += offset*2;

   // Continue until we reach null character
   i = 0;
   while (_message[i] != 0) {
      *vidmem = _message[i++];
      _message++;
      vidmem++;
      *vidmem = 0x0F;
      //*vidmem = foreground + (background << 4) + (blink << 7);
      vidmem++;
   }

   // Set new cursor position
   offset += i;
   out(0x3D5, (unsigned char)(offset));
   out(0x3D4, 14);
   out(0x3D5, (unsigned char)(offset >> 8));
}
User avatar
Pype.Clicker
Member
Member
Posts: 5964
Joined: Wed Oct 18, 2006 2:31 am
Location: In a galaxy, far, far away
Contact:

Re:Computer crashes once bootloader tries to jump to kernel

Post by Pype.Clicker »

there are hint for that too in the TroubleShooting category. I'd guess either non-zero-based datasegment or .rodata section missing in the image.
Post Reply