Code: Select all
00035450815d[APIC0] trigger interrupt vector=0x21
00035450815d[APIC0] triggered vector 0x21
00035450815d[APIC0] triggered vector 0x21 not acceptedBochs' debugger confirms the APIC LVT Vector as well as the IDT Vector are set correctly and to the correct address for the ISR.
I'm at a complete loss.
When I do call the interrupt using
Code: Select all
asm volatile("int $0x21");My APIC code looks like this:
Code: Select all
uint64_t apic = *((uint64_t *)0x5000); // 0x5000 contains address of the APIC from bootloader code
*((uint32_t *)(apic + APIC_SPUR)) |= 0x0100 | 0xFF; // software enable and 0xFF as spurious vector
*((uint32_t *)(apic + APIC_LDR)) = 0xFF000000;
*((uint32_t *)(apic + APIC_DFR)) = 0xF0000000;
*((uint32_t *)(apic + APIC_TPR)) = 0x00000000;
*((uint32_t *)(apic + APIC_TDCR)) = 0x00000003; // divisor of 16
*((uint32_t *)(apic + APIC_TMRLVTR)) = 0x00020000 | vector; // set to 0x21 in this case
*((uint32_t *)(apic + APIC_TICR)) = 0x00006400;

