The highest "safe" temperature for hardware?

All off topic discussions go here. Everything from the funny thing your cat did to your favorite tv shows. Non-programming computer questions are ok too.
Post Reply
earlz
Member
Member
Posts: 1546
Joined: Thu Jul 07, 2005 11:00 pm
Contact:

The highest "safe" temperature for hardware?

Post by earlz »

Ok, so once I was messing with a program called fanspeed which lets you control your fans. Well, I turned all the fans to like 20% to try to see how low I could have the fans while still keeping a stable temperature....well...I went browsing some forums or something and ended up forgetting about it...well...suddenly my fans start going like really loud and I remember and bring up fan speed...iirc the cpu temp was in the 200F range....This was with an AMD Athlon 4800+ X2 64 btw...
My hardware still works without any problems(except for a possible shortening in lifespan)

I know that of course, the cooler the better, but really what is the highest safe temperature for CPU, harddrive, GPU, ect?
User avatar
Zacariaz
Member
Member
Posts: 1069
Joined: Tue May 22, 2007 2:36 pm
Contact:

Post by Zacariaz »

It differs, fore the core2, that safe temp is like 65 celcius, but i dont know about amd, however what i do know is that with intel it is usually not a big problem if it gets too hot, either the performance degreases or the computer shuts down and after its cooled of a bit i usually works fine again. That is not the case with amd, so be aware.
I have had some pretty hot harddrives, gut it never has had any big influence and as for gpus that allso varys much. I remember having one of those old nvidia card 400 geforse 2 400 something, i think, the fan usually burned out after a short periode of time, but they worked just as fine anyway, allthough they did burn out eventually. Today gpus get very hot and i dont recomend adjusting the fan speed.

that all i have to say bout that...
User avatar
Solar
Member
Member
Posts: 7615
Joined: Thu Nov 16, 2006 12:01 pm
Location: Germany
Contact:

Post by Solar »

Simple: Get the datasheet for the hardware in question, usually avalable from the vendor. (Example: Core 2 Duo datasheet, AMD power and thermal data sheet.) They carry information on thermal limits .
Every good solution is obvious once you've found it.
User avatar
inflater
Member
Member
Posts: 1309
Joined: Thu Sep 28, 2006 10:32 am
Location: Slovakia
Contact:

Post by inflater »

My standard operating temperature is 50°C using Intel Pentium 4 1.8 GHz Northwood + AC Super Silent cooler. I was into overclocking, and when reaching FSB=108, temperature grew to 65°C. But this CPU isn't suitable for overclocking - i began to hear static from speakers :shock:. Of course a quick reset fixed everything up :)
I have some type of hybrid GeForce, with passive cooling I think, and it overclocked pretty well - from 250/143 to 290/300 without any graphics anomalies or system instability. ;)

The maximum temperature for CPU is 90°C, for motherboard 85°C (not sure but I've read that the motherboard would automatically shut itself down), and for GPU... don't know. Maybe 100°C ? :P

For me I don't care if PC is quiet or noisy. Shame that SpeedFan couldn't increase the fan speeds on my PC :D

Regards
inflater
My web site: http://inflater.wz.cz (Slovak)
Derrick operating system: http://derrick.xf.cz (Slovak and English :P)
Post Reply