Page 1 of 1
[SOLVED] IRQ12
Posted: Tue Mar 20, 2018 10:38 am
by Klakap
Good day!
Please tell me what command should I write to work interrupt IRQ12 if I already have a set up IDT? For example, for the functioning of the IRQ1 is outb(0x21 , 0xFD); What such a command should I write to work IRQ12?
Re: IRQ12
Posted: Tue Mar 20, 2018 3:33 pm
by Brendan
Hi,
Klakap wrote:Please tell me what command should I write to work interrupt IRQ12 if I already have a set up IDT? For example, for the functioning of the IRQ1 is outb(0x21 , 0xFD); What such a command should I write to work IRQ12?
The "outb(0x21 , 0xFD)" doesn't just unmask IRQ1, it masks everything else in the master PIC, and "everything else" includes the cascade line that the slave PIC is connected to.
What you really want is a pair of functions like "mask_IRQ(int IRQ_number);" and "unmask_IRQ(int IRQ_number);" that any code that wants to mask or unmask any IRQ can use safely (without upsetting the cascade line or any other IRQs). There is
example code for these functions in the wiki.
Cheers,
Brendan
Re: IRQ12
Posted: Sat Mar 24, 2018 5:45 am
by Klakap
When I copied the code to
https://wiki.osdev.org/PIC#Masking and I wrote instead of outb(0x21, 0xFD); command IRQ_set_mask(1); IRQ1 didn't work. Please write me how do I properly call the method IRQ_set_mask(); to give me the interrupts of work.
Re: IRQ12
Posted: Sat Mar 24, 2018 8:27 am
by iansjack
You set the mask on IRQ1 and then IRQ1 didn't work. Isn't that exactly what you would expect? You need to clear the mask to enable the line.
Re: IRQ12
Posted: Mon Mar 26, 2018 8:03 am
by Klakap
Maybe I have wrong set up IRQ12 in the IDT. I proceeded according to arjunsreedharan.org/post/99370248137/kernel-201-lets-write-a-kernel-with-keyboard and according to this tutorial I IRQ12 is set by the commands:
/* populate IDT entry of the mouse's interrupt */
mouse_address = (unsigned long)mouse_handler;
IDT[0x32].offset_lowerbits = mouse_address & 0xffff;
IDT[0x32].selector = 0x08; /* KERNEL_CODE_SEGMENT_OFFSET */
IDT[0x32].zero = 0;
IDT[0x32].type_attr = 0x8e; /* INTERRUPT_GATE */
IDT[0x32].offset_higherbits = (mouse_address & 0xffff0000) >> 16;
Is this correct? If not, please tell me how do I change.
Re: IRQ12
Posted: Mon Mar 26, 2018 10:37 am
by iansjack
Rather than blindly following dubious tutorials you would be better employed studying the various chips and how to program them. That way you will understand what you are doing rather than just copying code.
Re: IRQ12
Posted: Sat Apr 14, 2018 8:33 am
by Klakap
I will ask a very silly question, calling qemu IRQ12?
Re: IRQ12
Posted: Mon Apr 16, 2018 11:57 am
by Klakap
I've already figured out what the problem is, when I press some key, qemu calls the IRQ1 and IRQ12 but when move the mouse so IRQ12 calling only one time. Please help me. Code:
Code: Select all
/*PIC*/
outb(0x20, 0x11);
outb(0xA0, 0x11);
outb(0x21, 0x20);
outb(0xA1, 40);
outb(0x21, 0x04);
outb(0xA1, 0x02);
outb(0x21, 0x01);
outb(0xA1, 0x01);
outb(0x21, 0x0);
outb(0xA1, 0x0);
irq0_address = (unsigned long)irq0;
IDT[32].offset_lowerbits = irq0_address & 0xffff;
IDT[32].selector = 0x08; /* KERNEL_CODE_SEGMENT_OFFSET */
IDT[32].zero = 0;
IDT[32].type_attr = 0x8e; /* INTERRUPT_GATE */
IDT[32].offset_higherbits = (irq0_address & 0xffff0000) >> 16;
irq1_address = (unsigned long)irq1;
IDT[33].offset_lowerbits = irq1_address & 0xffff;
IDT[33].selector = 0x08; /* KERNEL_CODE_SEGMENT_OFFSET */
IDT[33].zero = 0;
IDT[33].type_attr = 0x8e; /* INTERRUPT_GATE */
IDT[33].offset_higherbits = (irq1_address & 0xffff0000) >> 16;
irq12_address = (unsigned long)irq12;
IDT[44].offset_lowerbits = irq12_address & 0xffff;
IDT[44].selector = 0x08; /* KERNEL_CODE_SEGMENT_OFFSET */
IDT[44].zero = 0;
IDT[44].type_attr = 0x8e; /* INTERRUPT_GATE */
IDT[44].offset_higherbits = (irq12_address & 0xffff0000) >> 16;
/* fill the IDT descriptor */
idt_address = (unsigned long)IDT ;
idt_ptr[0] = (sizeof (struct IDT_entry) * 286) + ((idt_address & 0xffff) << 16);
idt_ptr[1] = idt_address >> 16 ;
load_idt(idt_ptr);
Re: IRQ12
Posted: Thu Apr 19, 2018 10:44 am
by Klakap
I have already this problem is resolved. I forgot the fact, the load input from port 0x60 because I am irq12_handler used only to list on the screen how many times was the handler of the call. When I added the command inb(0x60) interrupts work correctly.