Page 1 of 1
10Gb NIC Software Development Manual
Posted: Tue Dec 16, 2014 12:08 am
by tsdnz
Hi everyone, I am moving my OS to 10Gb.
Does anyone have a 10Gb NIC Software Development Manual?
Such as Intel?
Really interested in 40Gb or 56Gb if anyone has these also??
I have had a look for it but as it has taken me a little time to get nowhere, I thought this might help??
Regards, Alistair
Re: 10Gb NIC Software Development Manual
Posted: Tue Dec 16, 2014 12:30 am
by tsdnz
I am currently looking for Intel X540 software development manual
Re: 10Gb NIC Software Development Manual
Posted: Tue Dec 16, 2014 12:34 am
by Brendan
Hi,
tsdnz wrote:I have had a look for it but as it has taken me a little time to get nowhere, I thought this might help??
It shouldn't have.
Mostly, you just go to anyone that sells ethernet cards and find out which 10 gigabit ethernet cards you could buy, then enter the product name followed by "datasheet" into a web search (e.g. "Intel 82599 10 Gigabit Ethernet Controller datasheet") and end up at a web page
like this one in less than 5 minutes.
Then (after downloading the datasheet and having a look) you go back to whoever sells the ethernet card and buy one; because it's impossible to test a driver when you don't have the hardware to test it on.
Note: Testing properly would actually mean you need a minimum of two 10 gigabit ethernet cards (and possibly more, and possibly a 10 gigabit switch, so you can test under max. load); possibly in addition to slower ethernet cards and/or switches (so that you can test that it correctly auto-negotiates the link speed).
Be warned that 10 gigabit ethernet isn't exactly cheap at the moment (be prepared to spent over $1000 just for a pair of cards to test your driver with).
Cheers,
Brendan
Re: 10Gb NIC Software Development Manual
Posted: Tue Dec 16, 2014 12:36 am
by Brendan
Hi,
tsdnz wrote:I am currently looking for Intel X540 software development manual
This one?
Note: I just searched for "Intel X540 datasheet"...
Cheers,
Brendan
Re: 10Gb NIC Software Development Manual
Posted: Tue Dec 16, 2014 12:48 am
by tsdnz
Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol, Lol
Silly bugger, I had it open as a PDF on my screen already.
I quickly scanned it.
Should have read it S L O W L Y.
Missed the "Programming Interface" which is what I was looking for.
Atleast I make my self laugh.
Already been in contact with supplier.
USD $285 from China
Will be using Ethernet Crossover Cable.
Will be testing with 1 X 10Gb cards in each OS
Then planning to test with 8 x 10Gb cards in one OS
For everyone who read this and thought what an idiot, (Still laughing at myself), I agree. LOL
EDIT:
The exact specs are: LREC9812BT PCI Express x8 Dual Copper Port 10 Gigabit Server Adapter (Intel X540
Based)