Mouse driver ps2 (help) (solved)

Question about which tools to use, bugs, the best way to implement a function, etc should go here. Don't forget to see if your question is answered in the wiki first! When in doubt post here.
Post Reply
grunge_asm
Posts: 6
Joined: Sun Feb 25, 2007 5:16 pm

Mouse driver ps2 (help) (solved)

Post by grunge_asm »

...
Last edited by grunge_asm on Sat Mar 10, 2007 3:12 pm, edited 2 times in total.
Top
grunge_asm
Posts: 6
Joined: Sun Feb 25, 2007 5:16 pm

...

Post by grunge_asm »

Hi All

I have changed the code for load mouse out DOS... but not success... this is source with run in DOS:

Code: Select all

ORG 100h 

   Jmp   InstallMouse  ; Load the mouse

MainCode:              ; Use the mouse loaded
   Mov   AX,12h
   Int   10h

MainLoop:              ; My Main Loop, show pixel with mouse coordinates
   Call  get_pos
   Mov   AH,0Ch
   Mov   CX,CX
   Mov   DX,DX
   Mov   AL,15
   Int   10h

   Xor   AX,AX
   Mov   AH,11h
   Int   16h
   Jnz   Exit
   Jmp   MainLoop

Exit:                 ; Exit code
   Mov   AX,3h
   Int   10h
   Mov   AX,0x4C00 
   Int   21h 

InstallMouse:         ; Load mouse in DOS, create one int 
   mov   bl,0adh
   call  keyboard_cmd
   call  keyboard_read ; Pac 1
   call  keyboard_read ; Pac 2
   call  keyboard_read ; Pac 3
   mov   bl,0aeh
   call  keyboard_cmd
   mov   al,20h
   out   0a0h,al
   out   20h,al
   mov   ax,0x2574
   mov   dx,mouse_code 
   int   21h 
   cli
   mov   bl,0a8h 
   call  keyboard_cmd 
   mov   bl,20h 
   call  keyboard_cmd 
   call  keyboard_read 
   or    al,2 
   mov   bl,60h 
   push  ax 
   call  keyboard_cmd 
   pop   ax 
   call  keyboard_write 
   mov   bl,0d4h 
   call  keyboard_cmd 
   mov   al,0f4h 
   call  keyboard_write 

   Jmp   MainCode        ; Return to MainCode (mouse loaded, then: use mouse ;) )


mouse_code:            ; Mouse codes
   push  ax
   push  bx
   push  cx
   push  dx
   push  di
   push  si
   push  es
   push  ds
   push  cs
   pop   ds
   mov   bl,0adh
   call  keyboard_cmd
   call  keyboard_read ; for first byte
   call  keyboard_read
   cbw
   add   word [pos_x],ax
   mov   ax,word [x_min]
   cmp   word [pos_x],ax
   jg    .goodhor1
   mov   word [pos_x],ax

.goodhor1:
   mov   ax,word [x_max]
   cmp   word [pos_x],ax
   jle   .goodhor2
   mov   word [pos_x],ax

.goodhor2:
   call  keyboard_read
   neg   al
   cbw
   add   word [pos_y],ax
   mov   ax,[y_min]
   cmp   word [pos_y],ax
   jg    .goodver1
   mov   word [pos_y],ax

.goodver1:
   mov   ax,word [y_max]
   cmp   word [pos_y],ax
   jle   no_show
   mov   word [pos_y],ax

no_show:
   mov   bl,0aeh
   call  keyboard_cmd
   mov   al,20h
   out   0a0h,al
   out   20h,al
   pop   ds
   pop   es
   pop   si
   pop   di
   pop   dx
   pop   cx
   pop   bx
   pop   ax
   iret

get_pos:
   mov   cx,word [pos_x]
   mov   dx,word [pos_y]
   ret

;------------------------------------------------------------------------

pos_x           dw 0
pos_y           dw 0
x_max           dw 639
x_min           dw 0
y_max           dw 479
y_min           dw 0

keyboard_read:
   push  cx
   push  dx
   xor   cx,cx

key_read_loop:
   in    al,64h
   test  al,1
   jnz   key_read_ready
   loop  key_read_loop
   mov   ah,1
   jmp   key_read_exit

key_read_ready:
   push  cx
   mov   cx,32

key_read_delay:
   loop  key_read_delay
   pop   cx
   in    al,60h
   xor   ah,ah

key_read_exit:
   pop   dx
   pop   cx
   ret 

keyboard_write:
   push  cx
   push  dx
   mov   dl,al
   xor   cx,cx

kbd_wrt_loop1:
   in    al,64h
   test  al,20h
   jz    kbd_wrt_ok1
   loop  kbd_wrt_loop1
   mov   ah,1
   jmp   kbd_wrt_exit

kbd_wrt_ok1:
   in    al,60h
   xor   cx,cx

kbd_wrt_loop:
   in    al,64h
   test  al,2
   jz    kbd_wrt_ok
   loop  kbd_wrt_loop
   mov   ah,1
   jmp   kbd_wrt_exit

kbd_wrt_ok:
   mov   al,dl
   out   60h,al
   xor   cx,cx

kbd_wrt_loop3:
   in    al,64h
   test  al,2
   jz    kbd_wrt_ok3
   loop  kbd_wrt_loop3
   mov   ah,1
   jmp   kbd_wrt_exit

kbd_wrt_ok3:
   mov   ah,8

kbd_wrt_loop4:
   xor   cx,cx

kbd_wrt_loop5:
   in    al,64h
   test  al,1
   jnz   kbd_wrt_ok4
   loop  kbd_wrt_loop5
   dec   ah
   jnz   kbd_wrt_loop4

kbd_wrt_ok4:
   xor   ah,ah

kbd_wrt_exit:
   pop   dx
   pop   cx
   ret

keyboard_cmd:
   xor   cx,cx

cmd_wait:
   in    al,64h
   test  al,2
   jz    cmd_send
   loop  cmd_wait
   jmp   cmd_error

cmd_send:
   mov   al,bl
   out   64h,al
   xor   cx,cx

cmd_accept:
   in    al,64h
   test  al,2
   jz    cmd_ok
   loop  cmd_accept

cmd_error:
   mov     ah,1
   jmp      cmd_exit

cmd_ok:
   xor     ah,ah

cmd_exit:
   ret
And this is my code changed for run out DOS (when I run it... not run correct)

Code: Select all

ORG 100h 

   Jmp   InstallMouse  ; Load the mouse

MainCode:              ; Use the mouse loaded
   Mov   AX,12h
   Int   10h

MainLoop:              ; My Main Loop, show pixel with mouse coordinates
   Call  mouse_code
   Call  get_pos
   Mov   AH,0Ch
   Mov   CX,CX
   Mov   DX,DX
   Mov   AL,15
   Int   10h

   Xor   AX,AX
   Mov   AH,11h
   Int   16h
   Jnz   Exit
   Jmp   MainLoop

Exit:                 ; Exit code
   Mov   AX,3h
   Int   10h
   Jmp   $

InstallMouse:         ; Load mouse in DOS, create one int 
   mov   bl,0adh
   call  keyboard_cmd
   call  keyboard_read ; Pac 1
   call  keyboard_read ; Pac 2
   call  keyboard_read ; Pac 3
   mov   bl,0aeh
   call  keyboard_cmd
   mov   al,20h
   out   0a0h,al
   out   20h,al
;   mov   ax,0x2574
;   mov   dx,mouse_code 
;   int   21h 
   cli
   mov   bl,0a8h 
   call  keyboard_cmd 
   mov   bl,20h 
   call  keyboard_cmd 
   call  keyboard_read 
   or    al,2 
   mov   bl,60h 
   push  ax 
   call  keyboard_cmd 
   pop   ax 
   call  keyboard_write 
   mov   bl,0d4h 
   call  keyboard_cmd 
   mov   al,0f4h 
   call  keyboard_write 

   Jmp   MainCode        ; Return to MainCode (mouse loaded, then: use mouse ;) )


mouse_code:            ; Mouse codes
   push  ax
   push  bx
   push  cx
   push  dx
   push  di
   push  si
   push  es
   push  ds
   push  cs
   pop   ds
   mov   bl,0adh
   call  keyboard_cmd
   call  keyboard_read ; for first byte
   call  keyboard_read
   cbw
   add   word [pos_x],ax
   mov   ax,word [x_min]
   cmp   word [pos_x],ax
   jg    .goodhor1
   mov   word [pos_x],ax

.goodhor1:
   mov   ax,word [x_max]
   cmp   word [pos_x],ax
   jle   .goodhor2
   mov   word [pos_x],ax

.goodhor2:
   call  keyboard_read
   neg   al
   cbw
   add   word [pos_y],ax
   mov   ax,[y_min]
   cmp   word [pos_y],ax
   jg    .goodver1
   mov   word [pos_y],ax

.goodver1:
   mov   ax,word [y_max]
   cmp   word [pos_y],ax
   jle   no_show
   mov   word [pos_y],ax

no_show:
   mov   bl,0aeh
   call  keyboard_cmd
   mov   al,20h
   out   0a0h,al
   out   20h,al
   pop   ds
   pop   es
   pop   si
   pop   di
   pop   dx
   pop   cx
   pop   bx
   pop   ax
;   iret
   ret

get_pos:
   mov   cx,word [pos_x]
   mov   dx,word [pos_y]
   ret

;------------------------------------------------------------------------

pos_x           dw 0
pos_y           dw 0
x_max           dw 639
x_min           dw 0
y_max           dw 479
y_min           dw 0

keyboard_read:
   push  cx
   push  dx
   xor   cx,cx

key_read_loop:
   in    al,64h
   test  al,1
   jnz   key_read_ready
   loop  key_read_loop
   mov   ah,1
   jmp   key_read_exit

key_read_ready:
   push  cx
   mov   cx,32

key_read_delay:
   loop  key_read_delay
   pop   cx
   in    al,60h
   xor   ah,ah

key_read_exit:
   pop   dx
   pop   cx
   ret 

keyboard_write:
   push  cx
   push  dx
   mov   dl,al
   xor   cx,cx

kbd_wrt_loop1:
   in    al,64h
   test  al,20h
   jz    kbd_wrt_ok1
   loop  kbd_wrt_loop1
   mov   ah,1
   jmp   kbd_wrt_exit

kbd_wrt_ok1:
   in    al,60h
   xor   cx,cx

kbd_wrt_loop:
   in    al,64h
   test  al,2
   jz    kbd_wrt_ok
   loop  kbd_wrt_loop
   mov   ah,1
   jmp   kbd_wrt_exit

kbd_wrt_ok:
   mov   al,dl
   out   60h,al
   xor   cx,cx

kbd_wrt_loop3:
   in    al,64h
   test  al,2
   jz    kbd_wrt_ok3
   loop  kbd_wrt_loop3
   mov   ah,1
   jmp   kbd_wrt_exit

kbd_wrt_ok3:
   mov   ah,8

kbd_wrt_loop4:
   xor   cx,cx

kbd_wrt_loop5:
   in    al,64h
   test  al,1
   jnz   kbd_wrt_ok4
   loop  kbd_wrt_loop5
   dec   ah
   jnz   kbd_wrt_loop4

kbd_wrt_ok4:
   xor   ah,ah

kbd_wrt_exit:
   pop   dx
   pop   cx
   ret

keyboard_cmd:
   xor   cx,cx

cmd_wait:
   in    al,64h
   test  al,2
   jz    cmd_send
   loop  cmd_wait
   jmp   cmd_error

cmd_send:
   mov   al,bl
   out   64h,al
   xor   cx,cx

cmd_accept:
   in    al,64h
   test  al,2
   jz    cmd_ok
   loop  cmd_accept

cmd_error:
   mov     ah,1
   jmp      cmd_exit

cmd_ok:
   xor     ah,ah

cmd_exit:
   ret
All help for correct the bug is welcome... or reply for why the bug is occurred.... thanks for all...

grunge
Top
pcmattman
Member
Member
Posts: 2566
Joined: Sun Jan 14, 2007 9:15 pm
Libera.chat IRC: miselin
Location: Sydney, Australia (I come from a land down under!)
Contact:
Contact pcmattman

Post by pcmattman »

What bug are you getting? Have you made sure that the code is executing the right stuff (use jmp $ and text output to test)? Have you made sure that the mouse you are testing with is definitely PS2 - a USB mouse doesn't count here...
Top
grunge_asm
Posts: 6
Joined: Sun Feb 25, 2007 5:16 pm

Post by grunge_asm »

The bug is when I run the source 2 out (not one int DOS)... the mouse reads is not correct(AX = mouse coord... but in pure mode it not correct)... but if I change for run with DOS int (source 1) the mouse reads is correct... my mouse is ps2... the bug must be in read the mouse without one Int(DOS)... why... the source 1 create one DOS int for the mouse codes... and the source 2 no... is in pure mode.... Thanks...

grunge
Top
pcmattman
Member
Member
Posts: 2566
Joined: Sun Jan 14, 2007 9:15 pm
Libera.chat IRC: miselin
Location: Sydney, Australia (I come from a land down under!)
Contact:
Contact pcmattman

Post by pcmattman »

Well, the DOS ints have been tried and tested. There's a high chance that they'll work. On the other hand, your code may not work. I have a similar problem, where the status byte gets mixed in with the movement data. I guess one of the ways you could test for this is find out which bytes are only 1 or 0 (the status byte isn't) or something like that.
Top
User avatar
Dex
Member
Member
Posts: 1444
Joined: Fri Jan 27, 2006 12:00 am
Contact:
Contact Dex

Post by Dex »

I have tested your code and on my test PC (win98) the Dos ver does not even work ?,
Also code like this:

Code: Select all

mov dx,dx
mov cx,cx
what is that for ?.
Also if i was you, i would code a text ver using a space block etc, untill you get it working then, move to mode 12h.
Top
grunge_asm
Posts: 6
Joined: Sun Feb 25, 2007 5:16 pm

Post by grunge_asm »

Hi All


pcmattman

thanks for yours sugestion... I go work for disable mouse and read byte mouse code correct (0 1)....

Dex

The DOS version (source 1) run correct... but when I change for not run in DOS (source 2) the mouse reads is not correct...

Code: Select all

Mov  DX,DX
Mov  CX,CX
This code is only for remenber the coords (pixel)...

and is for remender the result of mouse position:

Code: Select all

get_pos: 
   mov   cx,word [pos_x] 
   mov   dx,word [pos_y] 
   ret

mode 12h is for happy work ;).... and is easy to look the cursor working... thanks

I go work for yours suggestion...

Thanks for all

grunge
Top
grunge_asm
Posts: 6
Joined: Sun Feb 25, 2007 5:16 pm

Post by grunge_asm »

Hi all

I correct the mouse driver...
source1 (DOS)

Code: Select all

   mov   ax,0x2574 
   mov   dx,mouse_code 
   int   21h
I have changed it for create one "Set Interrupt vector" without DOS, I only changed it... now... mouse runs correct in pure code!!! ;)

Thanks for all help...

grunge
Top
Post Reply

Return to “OS Development”